Dragon Staff Adapter Cuffs
Turn any* staff into a Dragon Staff with the latest in Dragon Staff technology!
This set of adapter cuffs allows you to create a dragon staff out of any staff that has a 25mm (.98in) or less diameter shaft. You can use these on thinner diameter staffs, but you will need to apply some tape around the staff to make it thicker. We recommend using aluminum tape to do this.
Included with these cuffs is 8 fire spokes that can easily be attached loosely for practice allowing them to "give" a little when dropped, or you can screw them in nice and tight with the provided hex key. Alwasys be sure your spoked are secured TIGHTLY before lighting them on fire.
The spokes are made from 7075 aluminium alloy, which means that the spokes are lightweight but very strong. You must still be careful not to damage the connective areas of the prop as the spokes could become permanently attached to the cuffs.
The Dragon Adapter Cuffs make it super easy to transport your dragon staff as they are a breeze to take on and off. Why spend more money on a whole new dragon staff when you could just turn any of your staffs into one. We recommend a minimum staff length of 150mm (5.9') to safely do moves such as the Chi Roll. This is all subjective though as everyones height and style of play is different.
- Easily turn any staff into a Dragon Staff
- Fits 25mm shafts and smaller
- Made from 7075 Aluminum
- Comes with 8 fire spokes
Dragon Staffs are no kids play thing, they are a serios fire prop and can be quite dangerous in the wrong hands, please always use with caution.
Take it slow when learning to spin a dragon staff. Although these cuffs are strong they are susceptible to damage if dropped repeatedly at high speeds.